Symptoms
Some actions are not listed in /var/log/poa.debug.log
. How can I increase log verbosity?
Cause
Plesk Automation (PA) supports the same log levels as syslog supports, they are listed below in order of verbosity increasing:
- ALERT
- ERROR
- WARNING
- NOTICE
- INFO
- DEBUG
- TRACE
- TRACE_EXT
Log levels description is provided in the Linux manual pages for syslog
. By default poa.debug.log
level is set to DEBUG.
Resolution
In PA 11.1
poa.debug.log
verbosity can be changed with the following command:# /usr/local/pem/bin/pleskd_ctl -f /usr/local/pem/etc/pleskd.props setLogLevel <LOG LEVEL>
e.g:
# /usr/local/pem/bin/pleskd_ctl -f /usr/local/pem/etc/pleskd.props setLogLevel TRACE
In PA 11.5
poa.debug.log
verbosity can be changed with the list of the following actions:a. Open the
/usr/local/pem/etc/pleskd.props
file on the PA Management Nodeb. Set the 'loglevel' parameter to the desired value from the listed above:
loglevel=TRACE
c. Apply new configuration - restart pem service:
# service pem restart