Search Engine: Elastic

Article ID: 117515, created on Sep 26, 2013, last review on May 9, 2014

  • Applies to:
  • Operations Automation 5.5


Provider cannot add IPv6 pool to network group in PACI configuration in POA Provider Control Panel at Infrastructure > Network Groups > CI Network Group > Public Pools > Edit, the following error message is displayed:

Error text: "Unable to apply the changes made to the network group CI Network Group. Error: P80062: Gateway is not in subnet for public net: 14"

POA version is 5.5 Update 1.


Incorrect IP address of the gateway is configured in the IPv6 pool.

The following IPv6 pools are configured in POA:

Name            Address Space                                                   Netmask                                 Gateway
IPv6 pool #1    4401:3f00:160:4::      - 4401:3f00:160:4:7fff:ffff:ffff:ffff    ffff:ffff:ffff:ffff:0000:0000:0000:0000 2401:3f00:160:4::1
IPv6 pool #2    4401:3f00:160:4:8000:: - 4401:3f00:160:4:ffff:ffff:ffff:ffff    ffff:ffff:ffff:ffff:0000:0000:0000:0000 4401:3f00:160:4::1

Each IPv6 pool should have its own gateway inside the 'Prefix' network, not in the 'Subnet Prefix' network. As you can see in the example above the IP address 2401:3f00:160:4::1 is out of the 2401:3f00:160:4:8000:: - 2401:3f00:160:4:ffff:ffff:ffff:ffff range.


Set correct gateway IP address in the IPv6 pool (to be within the 'Prefix' network) and try to add IPv6 pool to network group again.

5b048d9bddf8048a00aba7e0bdadef37 caea8340e2d186a540518d08602aa065 5356b422f65bdad1c3e9edca5d74a1ae 2554725ed606193dd9bbce21365bed4e e12cea1d47a3125d335d68e6d4e15e07

Email subscription for changes to this article
Save as PDF